- The GDP of India is estimated using two methods: one based on economic activity (at factor cost) and the other based on expenditure (at market prices).
- The performance of eight distinct industries is evaluated using the factor cost technique.
- The expenditure-based method shows how different aspects of the economy, such as trade, investments, and personal consumption, are performing.
What is GDP in India and how is it calculated?
- GDP = private consumption + gross investment + government investment + government expenditure + government debt + government debt + government debt + government debt + government debt + government debt + government debt + government debt + government (exports – imports)
- It’s computed by multiplying Nominal GDP by Real GDP and then dividing by 100. (This is based on the formula.)
What is the formula for calculating GDP?
Gross domestic product (GDP) equals private consumption + gross private investment + government investment + government spending + (exports Minus imports).
GDP is usually computed using international standards by the country’s official statistical agency. GDP is calculated in the United States by the Bureau of Economic Analysis, which is part of the Commerce Department. The System of National Accounts, compiled in 1993 by the International Monetary Fund (IMF), the European Commission, and the Organization for Economic Cooperation and Development (OECD), is the international standard for estimating GDP.
What are the three methods for calculating GDP?
The value added approach, the income approach (how much is earned as revenue on resources utilized to make items), and the expenditures approach can all be used to calculate GDP (how much is spent on stuff).
What exactly is GDP? In India, how is GDP computed in Class 10?
The total production of each sector for a given year is determined by the value of the final goods and services produced in that sector during that year. Thus, GDP is the total value of all final goods and services generated in a country during a given year by the three sectors (Primary, Secondary, and Tertiary).
What are the three different types of GDP?
- The monetary worth of all finished goods and services produced inside a country during a certain period is known as the gross domestic product (GDP).
- GDP is a measure of a country’s economic health that is used to estimate its size and rate of growth.
- GDP can be computed in three different ways: expenditures, production, and income. To provide further information, it can be adjusted for inflation and population.
- Despite its shortcomings, GDP is an important tool for policymakers, investors, and corporations to use when making strategic decisions.
In 2021, what would India’s GDP be?
In its second advance estimates of national accounts released on Monday, the National Statistical Office (NSO) forecasted the country’s growth for 2021-22 at 8.9%, slightly lower than the 9.2% estimated in its first advance estimates released in January.
Furthermore, the National Statistics Office (NSO) reduced its estimates of GDP contraction for the coronavirus pandemic-affected last fiscal year (2020-21) to 6.6 percent. The previous projection was for a 7.3% decrease.
In April-June 2020, the Indian economy contracted 23.8 percent, and in July-September 2020, it contracted 6.6 percent.
“While an adverse base was expected to flatten growth in Q3 FY2022, the NSO’s initial estimates are far below our expectations (6.2 percent for GDP), with a marginal increase in manufacturing and a contraction in construction that is surprising given the heavy rains in the southern states,” said Aditi Nayar, Chief Economist at ICRA.
“GDP at constant (2011-12) prices is estimated at Rs 38.22 trillion in Q3 of 2021-22, up from Rs 36.26 trillion in Q3 of 2020-21, indicating an increase of 5.4 percent,” according to an official release.
According to the announcement, real GDP (GDP) or Gross Domestic Product (GDP) at constant (2011-12) prices is expected to reach Rs 147.72 trillion in 2021-22, up from Rs 135.58 trillion in the first updated estimate announced on January 31, 2022.
GDP growth is expected to be 8.9% in 2021-22, compared to a decline of 6.6 percent in 2020-21.
In terms of value, GDP in October-December 2021-22 was Rs 38,22,159 crore, up from Rs 36,22,220 crore in the same period of 2020-21.
According to NSO data, the manufacturing sector’s Gross Value Added (GVA) growth remained nearly steady at 0.2 percent in the third quarter of 2021-22, compared to 8.4 percent a year ago.
GVA growth in the farm sector was weak in the third quarter, at 2.6 percent, compared to 4.1 percent a year before.
GVA in the construction sector decreased by 2.8%, compared to 6.6% rise a year ago.
The electricity, gas, water supply, and other utility services segment grew by 3.7 percent in the third quarter of current fiscal year, compared to 1.5 percent growth the previous year.
Similarly, trade, hotel, transportation, communication, and broadcasting services expanded by 6.1 percent, compared to a decline of 10.1 percent a year ago.
In Q3 FY22, financial, real estate, and professional services growth was 4.6 percent, compared to 10.3 percent in Q3 FY21.
During the quarter under examination, public administration, defense, and other services expanded by 16.8%, compared to a decrease of 2.9 percent a year earlier.
Meanwhile, China’s economy grew by 4% between October and December of 2021.
“India’s GDP growth for Q3FY22 was a touch lower than our forecast of 5.7 percent, as the manufacturing sector grew slowly and the construction industry experienced unanticipated de-growth.” We have, however, decisively emerged from the pandemic recession, with all sectors of the economy showing signs of recovery.
“Going ahead, unlock trade will help growth in Q4FY22, as most governments have eliminated pandemic-related limitations, but weak rural demand and geopolitical shock from the Russia-Ukraine conflict may impair global growth and supply chains.” The impending pass-through of higher oil and gas costs could affect domestic demand mood, according to Elara Capital economist Garima Kapoor.
“Strong growth in the services sector and a pick-up in private final consumption expenditure drove India’s real GDP growth to 5.4 percent in Q3.” While agriculture’s growth slowed in Q3, the construction sector’s growth became negative.
“On the plus side, actual expenditure levels in both the private and public sectors are greater than they were before the pandemic.
“Given the encouraging trends in government revenues and spending until January 2022, as well as the upward revision in the nominal GDP growth rate for FY22, the fiscal deficit to GDP ratio for FY22 may come out better than what the (federal) budget projected,” said Rupa Rege Nitsure, group chief economist, L&T Financial Holdings.
“The growth number is pretty disappointing,” Sujan Hajra, chief economist of Mumbai-based Anand Rathi Securities, said, citing weaker rural consumer demand and investments as reasons.
After crude prices soared beyond $100 a barrel, India, which imports virtually all of its oil, might face a wider trade imbalance, a weaker rupee, and greater inflation, with a knock to GDP considered as the main concern.
“We believe the fiscal and monetary policy accommodation will remain, given the geopolitical volatility and crude oil prices,” Hajra added.
According to Nomura, a 10% increase in oil prices would shave 0.2 percentage points off India’s GDP growth while adding 0.3 to 0.4 percentage points to retail inflation.
Widening sanctions against Russia are likely to have a ripple impact on India, according to Sakshi Gupta, senior economist at HDFC Bank.
“We see a 20-30 basis point downside risk to our base predictions,” she said. For the time being, HDFC expects the GDP to rise 8.2% in the coming fiscal year.
Who determines India’s GDP?
The Ministry of Statistics and Program Implementation’s Central Statistics Office is in charge of macroeconomic data collection and statistical record keeping.
How do you boost your GDP?
- AD stands for aggregate demand (consumer spending, investment levels, government spending, exports-imports)
- AS stands for aggregate supply (Productive capacity, the efficiency of economy, labour productivity)
To increase economic growth
1. An increase in total demand
- Lower interest rates lower borrowing costs and boost consumer spending and investment.
- Increased real wages when nominal salaries rise faster than inflation, consumers have more money to spend.
- Depreciation reduces the cost of exports while raising the cost of imports, increasing domestic demand.
- Growing wealth, such as rising house values, encourages people to spend more (since they are more confident and can refinance their home).
This represents a rise in total supply (productive capacity). This can happen as a result of:
- In the nineteenth century, new technologies such as steam power and telegrams aided productivity. In the twenty-first century, the internet, artificial intelligence, and computers are all helping to boost productivity.
- Workers become more productive when new management approaches, such as better industrial relations, are introduced.
- Increased net migration, with a particular emphasis on workers with in-demand skills (e.g. builders, fruit pickers)
- Infrastructure improvements, greater education spending, and other public-sector investments are examples of public-sector investment.
To what extent can the government increase economic growth?
A government can use demand-side and supply-side policies to try to influence the rate of economic growth.
- Cutting taxes to raise disposable income and encourage spending is known as expansionary fiscal policy. Lower taxes, on the other hand, will increase the budget deficit and lead to more borrowing. When there is a drop in consumer expenditure, an expansionary fiscal policy is most appropriate.
- Cutting interest rates can promote domestic demand. Expansionary monetary policy (currently usually set by an independent Central Bank).
- Stability. The government’s primary job is to maintain economic and political stability, which allows for normal economic activity to occur. Uncertainty and political polarization can deter investment and growth.
- Infrastructure investment, such as new roads, railway lines, and broadband internet, boosts productivity and lowers traffic congestion.
Factors beyond the government’s influence
- It is difficult for the government to influence the rate of technical innovation because it tends to come from the private sector.
- The private sector is in charge of labor relations and employee motivation. At best, the government has a minimal impact on employee morale and motivation.
- Entrepreneurs are primarily self-motivated when it comes to starting a firm. Government restrictions and tax rates can have an impact on a business owner’s willingness to take risks.
- The amount of money saved has an impact on growth (e.g. see Harrod-Domar model) Higher savings enable higher investment, yet influencing savings might be difficult for the government.
- Willingness to put forth the effort. The vanquished countries of Germany and Japan had fast economic development in the postwar period, indicating a desire to rebuild after the war. The UK economy was less dynamic, which could be due to different views toward employment and a willingness to try new things.
- Any economy is influenced significantly by global growth. It is extremely difficult for a single economy to avoid the costs of a global recession. The credit crunch of 2009, for example, had a detrimental impact on economic development in OECD countries.
In 2009, the United States, France, and the United Kingdom all went into recession. The greater recovery in the United States, on the other hand, could be attributed to different governmental measures. 2009/10 fiscal policy was expansionary, and monetary policy was looser.
Governments frequently overestimate their ability to boost productivity growth. Without government intervention, the private sector drives the majority of technological advancement. Supply-side measures can help boost efficiency to some level, but how much they can boost growth rates is questionable.
For example, after the 1980s supply-side measures, the government looked for a supply-side miracle that would allow for a significantly quicker pace of economic growth. The Lawson boom of the 1980s, however, proved unsustainable, and the UK’s growth rate stayed relatively constant at roughly 2.5 percent. Supply-side initiatives, at the very least, will take a long time to implement; for example, improving labor productivity through education and training will take many years.
There is far more scope for the government to increase growth rates in developing economies with significant infrastructure failures and a lack of basic amenities.
The potential for higher growth rates is greatly increased by providing basic levels of education and infrastructure.
The private sector is responsible for the majority of productivity increases. With a few exceptions, private companies are responsible for the majority of technical advancements. The great majority of productivity gains in the UK is due to new technologies developed by the private sector. I doubt the government’s ability to invest in new technologies to enhance productivity growth at this rate. (Though it is possible especially in times of conflict)
Economic growth in the UK
The UK economy has risen at a rate of 2.5 percent each year on average since 1945. Most economists believe that the UK’s productive capacity can grow at a rate of roughly 2.5 percent per year on average. The underlying trend rate is also known as the ‘trend rate of growth.’
Even when the government pursued supply-side reforms, they were largely ineffective in changing the long-run trend rate. (For example, in the 1980s, supply-side policies had minimal effect on the long-run trend rate.)
The graph below demonstrates how, since 2008, actual GDP has fallen below the trend rate. Because of the recession and a considerable drop in aggregate demand, this happened.
- Improved private-sector technology that allows for increased labor productivity (e.g. development of computers enables greater productivity)
- Infrastructure investment, such as the construction of new roads and train lines. The government is mostly responsible for this.
What is an example of GDP?
The Gross Domestic Product (GDP) is a metric that measures the worth of a country’s economic activities. GDP is the sum of the market values, or prices, of all final goods and services produced in an economy during a given time period. Within this seemingly basic concept, however, there are three key distinctions:
- GDP is a metric that measures the value of a country’s output in local currency.
- GDP attempts to capture all final commodities and services generated within a country, ensuring that the final monetary value of everything produced in that country is represented in the GDP.
- GDP is determined over a set time period, usually a year or quarter of a year.
Computing GDP
Let’s look at how to calculate GDP now that we know what it is. GDP is the monetary value of all the goods and services generated in an economy, as we all know. Consider Country B, which exclusively produces bananas and backrubs. In the first year, they produce 5 bananas for $1 each and 5 backrubs worth $6 each. This year’s GDP is (quantity of bananas X price of bananas) + (quantity of backrubs X price of backrubs), or (5 X $1) + (5 X $6) = $35 for the country. The equation grows longer as more commodities and services are created. For every good and service produced within the country, GDP = (quantity of A X price of A) + (quantity of B X price of B) + (quantity of whatever X price of whatever).
To compute GDP in the real world, the market values of many products and services must be calculated.
While GDP’s total output is essential, the breakdown of that output into the economy’s big structures is often just as important.
In general, macroeconomists utilize a set of categories to break down an economy into its key components; in this case, GDP is equal to the total of consumer spending, investment, government purchases, and net exports, as represented by the equation:
- The sum of household expenditures on durable commodities, nondurable items, and services is known as consumer spending, or C. Clothing, food, and health care are just a few examples.
- The sum of spending on capital equipment, inventories, and structures is referred to as investment (I).
- Machinery, unsold items, and homes are just a few examples.
- G stands for government spending, which is the total amount of money spent on products and services by all government agencies.
- Naval ships and government employee wages are two examples.
- Net exports, or NX, is the difference between foreigners’ spending on local goods and domestic residents’ expenditure on foreign goods.
- Net exports, to put it another way, is the difference between exports and imports.
GDP vs. GNP
GDP is just one technique to measure an economy’s overall output. Another technique is to calculate the Gross National Product, or GNP. As previously stated, GDP is the total value of all products and services generated in a country. GNP narrows the definition slightly: it is the total value of all goods and services generated by permanent residents of a country, regardless of where they are located. The important distinction between GDP and GNP is based on how production is counted by foreigners in a country vs nationals outside of that country. Output by foreigners within a country is counted in the GDP of that country, whereas production by nationals outside of that country is not. Production by foreigners within a country is not considered for GNP, while production by nationals from outside the country is. GNP, on the other hand, is the value of goods and services produced by citizens of a country, whereas GDP is the value of goods and services produced by a country’s citizens.
For example, in Country B (shown in ), nationals produce bananas while foreigners produce backrubs.
Figure 1 shows that Country B’s GDP in year one is (5 X $1) + (5 X $6) = $35.
Because the $30 from backrubs is added to the GNP of the immigrants’ home country, the GNP of country B is (5 X $1) = $5.
The distinction between GDP and GNP is theoretically significant, although it is rarely relevant in practice.
GDP and GNP are usually quite close together because the majority of production within a country is done by its own citizens.
Macroeconomists use GDP as a measure of a country’s total output in general.
Growth Rate of GDP
GDP is a great way to compare the economy at two different times in time. This comparison can then be used to calculate a country’s overall output growth rate.
Subtract 1 from the amount obtained by dividing the GDP for the first year by the GDP for the second year to arrive at the GDP growth rate.
This technique of calculating total output growth has an obvious flaw: both increases in the price of products produced and increases in the quantity of goods produced result in increases in GDP.
As a result, determining whether the volume of output is changing or the price of output is changing from the GDP growth rate is challenging.
Because of this constraint, an increase in GDP does not always suggest that an economy is increasing.
For example, if Country B produced 5 bananas value $1 each and 5 backrubs of $6 each in a year, the GDP would be $35.
If the price of bananas rises to $2 next year and the quantity produced remains constant, Country B’s GDP will be $40.
While the market value of Country B’s goods and services increased, the quantity of goods and services produced remained unchanged.
Because fluctuations in GDP are not always related to economic growth, this factor can make comparing GDP from one year to the next problematic.
Real GDP vs. Nominal GDP
Macroeconomists devised two types of GDP, nominal GDP and real GDP, to deal with the uncertainty inherent in GDP growth rates.
- The total worth of all produced goods and services at current prices is known as nominal GDP. This is the GDP that was discussed in the previous parts. When comparing sheer output with time rather than the value of output, nominal GDP is more informative than real GDP.
- The total worth of all produced goods and services at constant prices is known as real GDP.
- The prices used to calculate real GDP are derived from a certain base year.
- It is possible to compare economic growth from one year to the next in terms of production of goods and services rather than the market value of these products and services by leaving prices constant in the computation of real GDP.
- In this way, real GDP removes the effects of price fluctuations from year-to-year output comparisons.
Choosing a base year is the first step in computing real GDP. Use the GDP equation with year 3 numbers and year 1 prices to calculate real GDP in year 3 using year 1 as the base year. Real GDP equals (10 X $1) + (9 X $6) = $64 in this situation. The nominal GDP in year three is (10 X $2) + (9 X $6) = $74 in comparison. Because the price of bananas climbed from year one to year three, nominal GDP grew faster than actual GDP during this period.
GDP Deflator
Nominal GDP and real GDP convey various aspects of the shift when comparing GDP between years. Nominal GDP takes into account both quantity and price changes. Real GDP, on the other hand, just measures changes in quantity and is unaffected by price fluctuations. Because of this distinction, a third relevant statistic can be calculated once nominal and real GDP have been computed. The GDP deflator is the nominal GDP to real GDP ratio minus one for a particular year. The GDP deflator, in effect, shows how much of the change in GDP from a base year is due to changes in the price level.
Let’s say we want to calculate the GDP deflator for Country B in year 3 using as the base year.
To calculate the GDP deflator, we must first calculate both nominal and real GDP in year 3.
By rearranging the elements in the GDP deflator equation, nominal GDP may be calculated by multiplying real GDP and the GDP deflator.
This equation displays the distinct information provided by each of these output measures.
Changes in quantity are captured by real GDP.
Changes in the price level are captured by the GDP deflator.
Nominal GDP takes into account both price and quantity changes.
You can break down a change in GDP into its component changes in price level and change in quantities produced using nominal GDP, real GDP, and the GDP deflator.
GDP Per Capita
When describing the size and growth of a country’s economy, GDP is the single most helpful number. However, it’s crucial to think about how GDP relates to living standards. After all, a country’s economy is less essential to its residents than the level of living it delivers.
GDP per capita, calculated by dividing GDP by the population size, represents the average amount of GDP received by each individual, and hence serves as an excellent indicator of an economy’s level of life.
The value of GDP per capita is the income of a representative individual because GDP equals national income.
This figure is directly proportional to one’s standard of living.
In general, the higher a country’s GDP per capita, the higher its level of living.
Because of the differences in population between countries, GDP per capita is a more relevant indicator for measuring level of living than GDP.
If a country has a high GDP but a large population, each citizen may have a low income and so live in deplorable circumstances.
A country, on the other hand, may have a moderate GDP but a small population, resulting in a high individual income.
By comparing standard of living among countries using GDP per capita, the problem of GDP division among a country’s residents is avoided.